Products

PBC is a term other cable manufacturers would prefer you forgot. Why? Because they don’t use it - it’s just too expensive. Since we respect your audio as much as you do, every JUMPERZ ZipLines cable is spun from PBC. Copper Clad Aluminum (CCA), conversely, has only 70% of the conductivity - thus increasing resistance and the impedance of your signal.

Contrary to accepted cable mythology, OFC doesn’t improve the sound of the cable, but provides greater flexibility before breaking than non OFC. Therefore all our PBC copper is also Oxygen Free.

AWG is the methodology used to measure a bare cable’s thickness without the jacket or insulation. The lower the number, the thicker the gauge. For example, 24 AWG would require 24 turns to equal an inch. Therefore, it is 1/24" wide. 26 AWG is 1/26” wide.

There is an ocean of cheap, knockoff connectors on the market that look like the brands we trust, but certainly don’t perform to spec. Poorly fitting connectors increase impedance and lose voltage (your audio!). Imagine all those electrons of your music traveling down a piece of wire at 2/3 the speed of light and falling into a crevasse - only some shall pass.

Our snake cables have nineteen strands of PBC yielding 24 AWG conductors. Securely jacketed by the thickest PVC available to provide the maximum conductor insulation, signal transmission is exceptional. Superior noise rejection, flexibility and all of your audio.

The cornerstone of our microphone and studio patch cables, this ultra-flexible cable is crafted from two 24-strands of PBC yielding 20 AWG conductors. Another 20 AWG drain wire is in constant contact with an overall conductive rubber inner core to provide 100% shielding from noise. Sealed in a rugged, but pliable PVC jacket - these cables are a pleasure to wrap post concert.

Our Star Quad boasts an even better signal to noise ratio over our ZipLines Mic cable (10 to 15dB). This ultra-flexible cable is crafted from four individual 19-strands of PBC yielding 24 AWG conductors. Another 24 AWG drain wire in constant contact with an overall conductive rubber inner core to provide 100% shielding from noise. Sealed in a rugged, but pliable PVC jacket- these cables are a pleasure to wrap post session.

Built with 41 stands of PBC yielding a 20 AWG conductor, insulated with Obese Low Density Polyethylene and then encased by a conductive rubber shell, the center conductor is fully insulated. A 36 AWG PBC maximum coverage spiral shield protects the wire from spurious magnetic fields (gremlins!) and is encased in an extremely durable, yet flexible jacket.

Our snake Cables have nineteen strands of PBC yielding 24 AWG conductors. Securely jacketed by the thickest PVC available to provide the maximum conductor insulation, signal transmission is exceptional. Superior noise rejection, flexibility and all of your audio.