Products

Cables

All our cabling is lovingly handcrafted from our own proprietary custom spec wire and married to the world’s most trusted connectors with silver solder. Sprinkle in smart, field-tested design with a fanatic attention to detail and you’ll recognize that our cables are built to outperform and outlast the competition. If you don't find the products you are looking for here, check out our custom shop.

Cable Features

Pure Bare Copper (PBC)

PBC is a term other cable manufacturers would prefer you forgot. Why? Because they don’t use it - it’s just too expensive. Since we respect your audio as much as you do, every JUMPERZ ZipLines cable is spun from PBC. Copper Clad Aluminum (CCA), conversely, has only 70% of the conductivity - thus increasing resistance and the impedance of your signal.

Oxygen Free Copper (OFC)

Contrary to accepted cable mythology, OFC doesn’t improve the sound of the cable, but provides greater flexibility before breaking than non OFC. Therefore all our PBC copper is also Oxygen Free.

American Wire Gauge (AWG)

AWG is the methodology used to measure a bare cable’s thickness without the jacket or insulation. The lower the number, the thicker the gauge. For example, 24 AWG would require 24 turns to equal an inch. Therefore, it is 1/24" wide. 26 AWG is 1/26” wide.

Legitimate Connectors

There is an ocean of cheap, knockoff connectors on the market that look like the brands we trust, but certainly don’t perform to spec. Poorly fitting connectors increase impedance and lose voltage (your audio!). Imagine all those electrons of your music traveling down a piece of wire at 2/3 the speed of light and falling into a crevasse - only some shall pass.

Individually Jacketed and Individually Shielded (IJIS)

Our snake cables have nineteen strands of PBC yielding 24 AWG conductors. Securely jacketed by the thickest PVC available to provide the maximum conductor insulation, signal transmission is exceptional. Superior noise rejection, flexibility and all of your audio.

JUMPERZ Signature Assembly Techniques (JSATs)

Covered ground wires insulate the junk noise picked up by the drain wire

Secured conductors guarantees that the cable doesn't break

Heat shrunk insulated solder joints that minimize signal loss

ZipLines Cable Types

ZipLines Microphone Cable

The cornerstone of our microphone and studio patch cables, this ultra-flexible cable is crafted from two 24-strands of PBC yielding 20 AWG conductors. Another 20 AWG drain wire is in constant contact with an overall conductive rubber inner core to provide 100% shielding from noise. Sealed in a rugged, but pliable PVC jacket - these cables are a pleasure to wrap post concert.

ZipLines Star Quad Cable

Our Star Quad boasts an even better signal to noise ratio over our ZipLines Mic cable (10 to 15dB). This ultra-flexible cable is crafted from four individual 19-strands of PBC yielding 24 AWG conductors. Another 24 AWG drain wire in constant contact with an overall conductive rubber inner core to provide 100% shielding from noise. Sealed in a rugged, but pliable PVC jacket- these cables are a pleasure to wrap post session.

ZipLines Instrument Cable

Built with 41 stands of PBC yielding a 20 AWG conductor, insulated with Obese Low Density Polyethylene and then encased by a conductive rubber shell, the center conductor is fully insulated. A 36 AWG PBC maximum coverage spiral shield protects the wire from spurious magnetic fields (gremlins!) and is encased in an extremely durable, yet flexible jacket.

ZipLines Snake Cable

Our snake Cables have nineteen strands of PBC yielding 24 AWG conductors. Securely jacketed by the thickest PVC available to provide the maximum conductor insulation, signal transmission is exceptional. Superior noise rejection, flexibility and all of your audio.

Microphone Cables

Studio Microphone - Your workhorse cable. These cables feature our ZLM cable, Neutrik black and gold connectors designed for years of worry free mating to your mics and patch panels. After tracking your session these cables are a breeze to coil and store. Part No. JGM-xx

Star Quad Studio Microphone - Your money cable. These cables feature our ZLQ cable, Neutrik black and gold connectors designed for connecting your top shelf mics for ultimate tracking.Part No. JSQGM-xx

Performance Microphone - Your gig cable. These cables feature our ZLM cable, Neutrik nickel and silver connectors designed for living in your road case. These cables are popular in music venues all over Detroit. You will also find them used by professional sound companies.Part No. JPM-xx

JSATs include: Covered grounds and secure solder joints.

Studio Patch Cables

Your single channel interconnects. These cables feature our ZLM cable and Neutrik nickel and silver connectors. They elegantly tie your gear together for flawless signal transmission.

Available in following configurations:

  • TRS to TRS - Part No. JSPP2TRS-xx
  • TRS to XLRM - Part No. JSPPTRSXF-xx
  • TRS to XLRF - Part No. JSPPTRSXM-xx

DB25 Studio Harnesses

JUMPERZ DB25 Studio Harnesses are designed to offer superior studio connectivity and installation flexibility. These cables feature our signature ZipLines ZL8 cable, metal DB25 hoods, machine terminated DB25 pins, and heavy duty knurled thumbscrews to ensure a secure connection 100% of the time. These cables use a Tascam DB25 pin configuration and braided Techflex sleeving on all fanouts.

JSATs include: Insulated ground connections and secured solder joints.

Available in the following configurations:

  • DB25 to DB25 - Part No. JDB25-DB25-xx
  • DB25 to ATRS - Part No. JDB25-ATRS-xx
  • DB25 to XLRM - Part No. JDB25-XLRM-xx
  • DB25 to XLRF - Part No. JDB25-XLRF-xx

Patch Bay Cables

8-Channel Snakes

These snakes feature our signature ZL8 cable, Neutrik nickel and silver XLR’s and our custom black chrome Amphenol TRS plugs. All fanouts include Techflex™ braided sleeving and are shrink capped at BOTH ends.

JSATs include: Insulated ground connections and secured solder joints.

Available in the following configurations:

  • TRS to TRS - Part No. J8CHATRS-ATRS-xx
  • TRS to XLRM - Part No. J8CHATRS-XM-xx
  • TRS to XLRF - Part No. J8CHATRS-XF-xx
  • XLRM to XLRF - Part No. J8CHXM-XF-xx

Box to Fan Snakes

JUMPERZ box to fan snakes are built for the road with studio grade cable. They feature a heavy duty wire mesh strain relief, black anodized aluminum, our signature ZipLines cable, touring style channel markers, and Neutrik connectors.

CPC Patch Systems

Metal Shop

Keep the headbanging for stage and let us perform the heavy lifting for you; everything from patch panels to breakout boxes to crosspatch stage systems are no problem. You tell us what you need and we’ll mock up the drawing with our state of the art 3D CAD design software. Once approved, we’ll cut the plates in-house out of the highest grade of anodized aluminum with our high-precision CNC machines.

Next, we laser engrave the designations, fill it with the appropriate connectors, custom label the cables and boom! Your dream is realized. If you can imagine it, we can build it. From stage to studio, complete systems to short orders, we’ll get you connected.

Ready-made Metal Work

Standard in-stock wall plates for quick shipping include:

  • 6 x 6
  • 8 x 8
  • 8 x 10
  • 8 x 12
  • 10 x 10
  • 12 x 12
  • 13 x 13
  • Gang plates 1, 2, 3, 4
  • Rack plates 1RU, 2RU, 3RU, 4RU, 6RU

In-stock snake boxes include:

  • 8-channel
  • 16-channel
  • 2-channel CPC sub box
  • Custom sizes available upon request

Custom Shop

JUMPERZ custom shop exists for one simple reason - to make your studio, stage, or house of worship install connect seamlessly. From a simple mic cable with an odd length, DB25 with a custom pin-out, or box to fan snake with an odd connector combination, we've got you covered. Simply drop us a line and we will make sure you are taken care of through one of our authorized dealers.

If you are a contractor, integrator or retail outlet please don't hesitate to contact us.